This unit is like a very powerful relay capable of switching 80 amps on one high power output and two 6 Amp low power outputs. This unit is not configurable and is only controlled via CAN BUS or via the three inputs.
The unit can be used to control the main current from the battery for hight power loads, as an example, when you need to connect a hydraulic pump or a 230 VAC inverter.
Get Personal Guidance from our Sales Team
| Model | DRB8012-3 ESP |
| Power supply | 10-22 VDC |
| Internal Power consumption (approximately)Normal mode no output active / Sleep mode | ~5mA/~2mA |
| Undervoltage protection (adjustable) | Fixed 10V |
| Overvoltage protection (adjustable) | No |
| Max.total current 1 minute | 80A |
| Max. total current continous | 80A |
| Total number of inputs | 3 pcs |
| Digital inputs | 3 of 3 pcs |
| Analogue inputs | 0 pcs |
| Input resistance @12V | 22kΩ |
| Connections inputs (jackable screw terminals) | 10-pole inc. +/- |
| Number of outputs | 3 pcs |
| Connection outputs | M5 nut + crimpconnector |
| Fuse size A, outputs | Out 1 Fixed 80A, Out 2-3 Fixed 6A |
| Connection power supply | M5 nut |
| Bluetooth | No |
| Motor control H-Bridge (prel current) | No |
| Error Indication | No |
| Led per output (adjustable color) | No |
| Communication bus (CAN bus) | Yes 1pcs RJ10 |
| Computer connections | No |
| Earthing Signals | Yes with external resistor to positive |
| Handcontroller, Swich Panels, sensors etc. | No |
| Size (mm) | 119x57x21 |
| Weight |
