PRODUCTS 12 AND 24 VOLT

ADDIO DIGITAL RELAY BOXES

Within the Addio product range are four different models of Digital Relay Boxes. The main differences between the models are the power supply (12V or 24V) and the possibility to control the box with a hand controller, or wirelessly with a mobile device. The models that can be controlled by a hand controller or a mobile device are called "Advanced", or shortened "ADV". These models also have RGB LED indication for each output, built-in H-bridge for DC motor control and built-in pull-up resistors for grounded signals.

The outputs have many functions, such as:

  • Settable fuse with slow fuse option
  • Fixed or normal “relay” function
  • Many different timers from seconds to hours
  • Set/reset from different inputs
  • Blink functions with settable duty cycle millisecond range to hours

  • Individual voltage settings for each output
  • Toggle functions
  • Counters
  • Logics for sirens and blue-lights for emergency vehicles
  • Parallel or serial use of multiple functions
  • Multiple input sources

  • Temperature control from sensor
  • H-bridge for DC motor control with timers and deadtime settings
  • Energy saving mode
  • Inputs and outputs can be combined without any limitations

The Models

DRB-1612-4 Advanced

  • 12V Power supply
  • 4 outputs / 6 inputs
  • 16A total output current
  • Communication (CAN) port for external devices
  • Can be controlled with Hand Controller, Switch Panels etc.
  • Can be controlled with a mobile device

DRB-8012-4 ESP (Slave)

  • 12V Power supply
  • 3 outputs / 3 inputs
  • 1high current output (80A)
  • Not possible to configure via USB, works as a slave device from other ADV units.

DRB-9012-8 Standard
DRB-9012-8 Advanced

  • 12V Power supply
  • 8 outputs / 8 inputs
Advanced features
  • Can be controlled with hand controller
  • Can be controlled with a mobile device
  • LED indication for each output
  • H-bridge for DC motor control
  • Built in pull-ups for grounded signals

DRB-5024-8 Advanced
DRB-1024-8 Advanced

  • 24V Power supply
  • 8 outputs / 8 inputs
  • 50A / 100A
  • Can be controlled with hand controller
  • Can be controlled with a mobile device
  • LED indication for each output
  • H-bridge for DC motor control
  • Built in pull-ups for grounded signals

Technical data

Dimensions:

Dimensions: DRB-1612-4

HAND CONTROLLER AND SWITCH PANELS

For the advanced models a hand controller and two different switch panels are available as an accessory which can be connected via a COM contact (RJ10).

Both controller and indicator
The hand controller has 15 RGB LED illuminated buttons, of which 13 can be linked together with the outputs on the digital relay box. Each button can be set in several different modes and can either activate an output or work as an indicator to show whether a specific output or input is active.

The 8 way switch panel has the same features as the bigger brother and could either be mounted on a tiltable bracket or surface mounted on a flat surface with double sided tape

All settings are saved in the relay box and not in the external unit, which makes it possible, for example, to change the hand controller but still retain all of the current settings.

The hand controller and switch panel can also be connected to multiple DRBs with a built in master slave system. You are also able to connect two hand controllers and up to 4 switchpanel to one DRB for parallel use or with individual settings for each unit.

The hand controller and switch panel has a built-in temperature sensor that can be used for output control. The switch panel has also a light senor on top that could be used to detect night and day mode for connected warning lights etc.

BLUETOOTH MODULE (BLE 5.0 TO CAN)

For the DRB-9012-8 ADV and DRB-5024-8 ADV, a Bluetooth module is available as an accessory which can be connected via a COM contact (RJ10).

Your smartphone or tablet will then turn into a remote control for your system. The BLE module is a separate module to be able to mount it in a more optimal way due to the signal strength between the BLE module and your phone/tablet. Range is up to more than 150 meter depending on  the phone and how its mounted. Available for both Android and iOS units and up to two mobile devices could be connected at the same time for parallel control.

Download the app from Apple Appstore here
Download the app from Google play here

Call us
+46 (0)70 594 11 73

Email us
info@addio.eu

Visit us
Addio Electronics AB
Humlegatan 27A
SE-722 26 Västerås
Sweden

About us >>

Copyright Addio Electronics AB © 2024